Do I Need a Pool Barrier Inspection in Victoria?

Absolutely. Under current Victorian law, all pools and spas capable of holding over 30cm of water must be registered with your local council. They also require periodic inspections to ensure barriers meet safety standards.

Key Pool Barrier Compliance Requirements in Victoria:

• All pools and spas must be registered with your council.
• A compliance certificate (Form 23) is required after an inspection.
• Barriers must be inspected every four years by a licensed inspector.
• New pool installations must pass inspection within 30 days of completion.

At MPF Safety Inspections, we take the stress out of compliance. Our process is simple, informative, and supportive—ensuring your barrier meets all legal requirements.

What Does a Compliant Pool Barrier Look Like?

While regulations vary depending on your pool’s construction date, some universal safety standards apply:

• Barrier height: Minimum 1.2 metres from ground level.
• Non-climbable zone: At least 90cm clear of any objects that could be used to climb the fence.
• Gate standards: Gates must swing away from the pool, self-close, and self-latch.
• Gap restrictions: No gap under the barrier can exceed 10cm; vertical gaps must be under 10cm as well.
• Latch height: Latches must be positioned 1.5 metres above ground or adequately shielded.

These requirements are set under AS1926.1-2012 and other standards based on your pool’s build date. Our inspections ensure your setup complies with the most relevant regulations.

Common Reasons for Pool Barrier Non-Compliance

As someone who inspects pool barriers every day, I often encounter repeat issues that can easily be avoided:

• Faulty or incorrectly aligned gate mechanisms
• Objects too close to the barrier, creating climbing risks
• Worn or deteriorated panels and fencing materials
• Boundary fences that don’t meet the standard

If you’re unsure whether your barrier passes the test, a quick inspection now could save you penalties—or even save a life.

What If My Pool Barrier Fails Inspection?

If your barrier is found to be non-compliant, you’ll be issued a notice and given up to 60 days to rectify the issues and schedule a reinspection.

At MPF Safety Inspections, we don’t just highlight problems—we offer clear, practical solutions so you can bring your barrier up to code quickly and affordably.

Why Choose MPF Safety Inspections?

Led by myself, Michael—a registered builder, licensed pool barrier inspector, and father of three—MPF Safety Inspections delivers a personal, honest approach. We’re committed to helping Melbourne families enjoy their pools safely and legally.

• VBA Registered

• Fully Insured

• SPASA Member
  
  

Fast Turnaround & Friendly Support

Our Melbourne Service Areas

At MPFS Inspections, we proudly offer pool barrier  inspections across Melbourne’s south-eastern suburbs. If you’re in any of the areas below or nearby, we can assist you with fast, professional service:

• Pool Barrier Inspections Bentleigh
• Pool Barrier Inspections Brighton
• Pool Barrier Inspections Murrumbeena
• Pool Barrier Inspections Chadstone
• Pool Barrier Inspections Oakleigh
• Pool Barrier Inspections Moorabbin
• Pool Barrier Inspections Hampton
• Pool Barrier Inspections Caulfield
• Pool Barrier Inspections Black Rock
• Pool Barrier Inspections Cheltenham
• Pool Barrier Inspections Berwick
• Pool Barrier Inspections Cranbourne
• Pool Barrier Inspections Glen Waverley
• Pool Barrier Inspections Rowville
• Pool Barrier Inspections Mount Waverley
• Pool Barrier Inspections Doncaster
• Pool Barrier Inspections Narre Warren
• Pool Barrier Inspections Doncaster East
• Pool Barrier Inspections Mulgrave
• Pool Barrier Inspections Camberwell
• Pool Barrier Inspections Boronia
• Pool Barrier Inspections Wantirna